How to use the optical fiber polisher

How to use the optical fiber polisher

Using a fiber optic grinder is relatively simple, but there are still some key steps and techniques to consider. Here's a basic guide to using a fiber optic grinder:

1 Preparation
Before using the fiber optic grinder, you need to install the abrasive and polishing pads and ensure they are in good condition. You also need to select the appropriate grinding and polishing procedures based on the fiber type and requirements.

2 Cleaning the Fiber Endface
Before polishing, ensure the fiber endface is clean and dust-free. Gently wipe the fiber endface with detergent and cleaning paper to remove surface dirt and grease.

3 Precise Positioning
Insert the fiber into the clamping device of the fiber optic grinder and ensure that the fiber is correctly positioned and securely fastened. Precise positioning ensures stable and proper contact between the fiber endface and the polishing head.

4 Performing Grinding and Polishing
According to the selected grinding program, start the fiber optic grinder and begin the grinding and polishing operation. Typically, the fiber optic grinder automatically controls the movement and pressure of the polishing head to ensure that the endface's flatness and optical properties meet the required standards.

5 Inspection and Evaluation
After completing grinding and polishing, remove the fiber and inspect the endface's quality. Use a microscope or optical inspection equipment to evaluate the optical properties of the fiber endface, such as surface flatness, angular accuracy, and sharpness.

6 Cleaning and Maintenance
After polishing the fiber, the fiber optic grinder should be cleaned and maintained promptly. Remove any residual abrasive and polishing pads, and ensure that all parts of the machine are clean and functioning properly. Perform regular maintenance and replace the abrasive and polishing pads to maintain the efficient operation of the fiber optic grinder.

The instructions for using a fiber optic grinder may vary depending on the brand and model. Therefore, before operating the machine, consult the user manual and follow the manufacturer's instructions.

In summary, a fiber optic grinder is an important piece of equipment used to precisely process and maintain fiber endfaces. By using the optical fiber polisher correctly, you can ensure the efficient transmission of optical fibers in the fields of communication, medical treatment and industry, and extend the service life of optical fibers.